
Point-of-Purchase Displays: A Buyer’s Guide for Alc Bev & CPG Teams
What is a point-of-purchase display?
A point-of-purchase display is any physical material placed at or near the shelf to influence a purchase decision in the moment: floor displays, backbar glorifiers, pole toppers, shelf talkers, case cards, cold box units, table tents, and the promotional and branded merchandise that supports a program. For alc bev and CPG teams, these materials are one of the last controllable touchpoints before a customer decides what goes in the cart.
Most trade marketing teams manage dozens, sometimes hundreds, of these items across multiple brands and markets every year. The buying decisions behind them, what to order, from whom, at what price, and how to know it actually worked, are rarely as simple as they look from the outside. This guide walks through what those decisions actually involve.
What Types of POS Displays Do Alc Bev and CPG Brands Typically Use?
Most programs fall into four broad categories. Permanent retail fixtures cover floor displays, backbar glorifiers, and cold box units built for durability and repeat use. Printed POS materials include shelf talkers, posters, table tents, and case cards, the high-volume, quick-turnaround items that go up and come down with each cycle. Promotional and event materials cover banners, tents, pop-up structures, and signage tied to a specific activation window. Branded merchandise, glassware, apparel, and accessories, rounds out the mix, usually supporting trade incentive or on-premise programs rather than shelf presence itself.
Beyond those four categories, most brands also carry a long tail of 300 or more smaller, lower-volume line items: specialty fixtures, one-off event pieces, market-specific materials. Individually small, collectively significant, and often the hardest part of a POS program to manage well.
Where Does a Typical POS Budget Actually Go?
Across beverage and spirits brands, the pattern is consistent: roughly 75% of annual POS spend concentrates in just four categories. Permanent retail fixtures typically account for 30 to 35% of budget, printed POS materials 20 to 25%, promotional and event materials 12 to 18%, and branded merchandise 10 to 15%. The remaining quarter of spend is spread across the long tail, the 300-plus smaller items that individually don’t move the needle but collectively represent real dollars.
That concentration matters for how a buying team spends its time. Quoting and negotiating every one of those 300-plus line items wastes weeks optimizing spend that, in aggregate, represents a quarter of the budget. The bigger opportunity almost always sits in the big four.
Why Does Pricing Vary So Much Between Two Nearly Identical Display Quotes?
It depends heavily on what’s being quoted. On standard print items, complexity is low and volume is high, so accurately forecasting quantity matters more than negotiating pennies per unit. Getting the volume right is where the real savings live.
Custom fixtures and displays are a different story. Price can vary 40 to 60% on the same basic item depending on specifications, materials, quantity, and tooling. Two quotes for what look like the same floor display can land far apart because one vendor priced a lighter-gauge material, a smaller production run, or simpler tooling than the other. A quote that isn’t built from a complete spec sheet isn’t really comparable to anything, it’s a guess with a dollar sign on it.
What Should a POS Display Quote Request Actually Include?
A usable RFQ needs the same core elements every time: item specifications down to material, dimensions, and finish; exact quantities per SKU; a required delivery date; and the program or activation it’s tied to. Vague specs are the single biggest reason quotes from different vendors can’t be compared apples to apples.
This is also where a platform like brandhub, built by Select, changes the mechanics rather than the fundamentals. Instead of emailing specs to vendors one at a time, a team can define the request once and send it to its full vendor network simultaneously, then compare the bids that come back side by side. The underlying discipline, complete specs, clear quantities, a real deadline, doesn’t change. What changes is how much manual coordination it takes to run that process well.
How Many Vendor Bids Should a Team Collect Before Awarding a Program?
More than one, and ideally from a mix of incumbent and new vendors competing on the same spec. A single-vendor relationship, even a good one, doesn’t tell a team whether the price it’s paying is competitive. Running a proper multi-vendor bid doesn’t mean abandoning vendors a brand already trusts, it means putting them on a level playing field with everyone else and letting the data decide, item by item. One vendor may win on fixtures, another on print, another on promotional materials. That’s normal, and it’s the point.
Whatever process a team uses, every bid, every award decision, and the reasoning behind it should be logged somewhere it can be pulled up later. Procurement decisions on recurring, multi-year spend get scrutinized eventually, and a clean audit trail is worth building before that day comes, not after.
What Questions Should a Buyer Ask Before Signing Off on a POS Display Order?
A few questions consistently separate a well-run order from an expensive mistake. Is the quantity forecast actually grounded in this year’s account list and program timing, or is it last year’s number rolled forward? Does the quote reflect a complete spec, or is there room for the vendor to substitute materials once production starts? Is the lead time realistic against the activation date, with enough buffer for a reprint or a late change? And does the vendor’s quality track record match what the program actually needs, a premium hero fixture and a high-volume shelf talker don’t need the same vendor or the same scrutiny.
How Do You Know Whether a POS Display Program Actually Performed After It Shipped?
This is where most trade marketing teams still operate on faith. Millions get spent producing displays, pole toppers, and shelf materials, and then there’s largely silence: did they go up, when, where, and for how long. Distributor surveys can offer a read on in-market presence, but they take months to compile and are often outdated before the results come back.
brandhub’s beacon tracking gives teams live visibility into deployed displays today. A patent-pending, no-touch tracking approach, embedded at the point of production rather than relying on a beacon, is still in testing and not yet available broadly. Either way, the direction is the same: treating a display fleet as something a team can actually measure, not just something it hopes worked.
What’s the Real Takeaway for a Team Planning Next Year’s POS Program?
Start with where the money actually goes. Get real specs before comparing quotes. Run more than one vendor against every meaningful spec. Keep a record of what was ordered, awarded, and why. And build in a way to find out, after the fact, whether the program actually made it to the shelf. None of that requires a bigger budget, it requires better visibility into a process most teams have been running on instinct and spreadsheets for years. If more than one of these questions was harder to answer than it should be, it might be worth seeing what that visibility actually looks like.
FREQUENTLY ASKED QUESTIONS
A point-of-purchase display is any physical material placed at or near the shelf to influence a purchase decision in the moment, including floor displays, backbar glorifiers, pole toppers, shelf talkers, case cards, cold box units, table tents, and branded merchandise.
Roughly 75% of annual POS spend concentrates in four categories: permanent retail fixtures (30 to 35%), printed POS materials (20 to 25%), promotional and event materials (12 to 18%), and branded merchandise (10 to 15%). The remaining quarter is spread across a long tail of 300 or more smaller line items.
On standard print items, price differences mostly come down to volume forecasting. On custom fixtures and displays, price can vary 40 to 60% on the same basic item depending on specifications, materials, quantity, and tooling, so a quote built from an incomplete spec isn’t really comparable to anything.
A usable quote request needs item specifications down to material, dimensions, and finish, exact quantities per SKU, a required delivery date, and the program or activation it’s tied to. Vague specs are the most common reason vendor quotes can’t be compared apples to apples.
More than one, ideally a mix of incumbent and new vendors competing on the same spec. A single-vendor relationship doesn’t reveal whether a price is competitive, and different vendors often win on different item categories within the same program.
Most teams rely on distributor surveys, which take months to compile and are often outdated by the time results come back. brandhub’s beacon tracking gives teams live visibility into deployed displays today; a patent-pending, no-touch tracking approach is still in testing and not yet available broadly.
SHARE:
IN OUR CUSTOMER’S WORDS
READY TO SEE WHAT’S POSSIBLE?
READY TO SEE WHAT’S POSSIBLE?
Start with the platform, start with the production, or let’s just talk
through what you’re working on.